Wiring in many old houses is out of date, which would not be capable to withstand the demand of present appliances. The modern gadgets would require modern wiring system in place. LAPP, one of the leading cable manufacturers India, provides you with the solution to this by ensuring efficient and safe conduct of electric current.
In this section of our blog, we are going to address the wiring problems, when we consider cable manufacturers India:
Let’s start with the fuse:
If you consider the present day, circuit breakers have taken over fuse, when you consider cable manufacturers India, making fuse a rare commodity. Fuse, however, is the simplest form of the protective shield and work just fine, unless someone installs fuses with higher amperage than the wires can safely handle. Which results in risk of overheating, insulation damage and possible fire accidents because of this. And once the insulation is out of order, replacing the fuse wire with lower amperage won’t help. Rewiring would only be the suitable option.
Why is this topic so important to discuss, is the fact that improper wiring installation can pose a serious fire or electrocution hazards. If you didn’t have your wiring inspected for the old house that you have bought, this should be the right time to go about, to look out for any corrosion in the service panel or any sort of risky connection including insulation damage in the wires. And repeat the following process every once in a while, approximately the cycle should repeat after every 5 years.
We will be breaking this section down and pointing at few common wiring issues to look out for when we consider cable manufacturers India:
Note: Anytime you work with wiring, be sure to turn off the circuit at the main breaker panel.
Lesser Outlets:
Heavy reliance on extension cords and power strips is not a good habit. As undersized extension cords can overheat and ignite a fire for heavy loads, unless you use heavy-duty extension cords, 14-gauge or thicker.
It is preferable to not use extension, and have enough outlets, which is one of the ergonomic features of a good wiring system.
Over wired Panel:
It is better to avoid having a panel that contains more circuits than it’s rated to handle.
Over lamping:
A light fixture has a bulb with a higher wattage than the fixture is designed for. Therefore, the need to stay within the wattage limit listed on all light fixtures.
The bulb’s intense heat can scorch or melt the socket and insulation on the fixture’s wires, which increases the risk of arcing, resulting in sparks that jump through the air from one wire to another. The damage to socket and wires remains even after the bulb has been removed, resulting in fire accidents.
Uncovered Junction Box:
Junction box houses the splices where wires are connected to one another; a person could inadvertently damage the wires or get a shock. Make sure to have proper closure to this junction box.
Aluminium Wiring:
Cheaper option when compared to copper wire, but not a safe option to go with. Aluminium corrodes when in contact with copper, so connections loosen, which can lead to arcing and fires.
Above listed are few of the aspects of wiring failures which can inflict harm.LAPP India, one of the leading cable manufacturers India, ensures the best in quality products and features, ruling the world of electric and electronics department.
Also know about the how Hybrid cable solutions define the Automation here
Comments
Post a Comment